Chapter 7: Windows 2000 Installation; Overview; Windows 2000 Driver Installation - Linksys USB200M Guia Del Usuario

Chapter 7: Windows 2000
Installation

Overview

After physically connecting the Adapter to your computer's USB port or hub,
follow these instructions to install the hardware device driver. The installation
procedure for the hardware device driver may vary slightly depending on your
current system configuration. If at any time during the installation you
encounter problems, consult "Appendix A: Troubleshooting."

Windows 2000 Driver Installation

1. If you haven't already, start your computer.
2. Windows 2000 will automatically detect the Adapter connected to your PC.
When the Welcome to the Found New Hardware Wizard screen appears,
insert the Driver CD into your CD-ROM drive, and click the Next button.
3. Select Search for a suitable driver for my device (recommended). Click
the Next button.
Note: Throughout this guide, it is assumed that "D" is the letter of
your CD-ROM drive.
22
Instant EtherFast
Figure 7-1
® Series Compact USB 2.0 10/100 Network Adapter
4. Select Specify a location to find the correct driver. Click the Next button
to continue.
5. In the Copy manufacturer's files from: field, enter D:\win2000. Then click
the O K button.
Note: Do not click Cancel at any time during the installation
process. Doing so will prevent your driver from being properly
installed on your PC.
Figure 7-2
Figure 7-3
23