Chapter 8: Windows Xp Installation; Overview; Windows Xp Driver Installation - Linksys USB200M Guia Del Usuario

6. The Driver Files Search Results screen will appear. Click the Next button.
7. For Windows 2000, you may be informed that a digital signature has not
been found (see Figure 7-4). This is normal, and it has been verified that the
Adapter does work with Windows 2000. Click the Yes button to continue.
8. The Completing the Found New Hardware Wizard screen will appear. Click
the Finish button, and remove the Driver CD from the CD-ROM drive.
Congratulations! The installation of the Compact USB 2.0 10/100
Network Adapter is complete.
For more information about networking under Windows 2000, refer to
your Microsoft Windows 2000 documentation.
24
Instant EtherFast
Figure 7-4
® Series Compact USB 2.0 10/100 Network Adapter
Chapter 8: Windows XP
Installation

Overview

After physically connecting the Adapter to your computer's USB port or hub,
follow these instructions to install the hardware device driver. The installation
procedure for the hardware device driver may vary slightly depending on your
current system configuration. If at any time during the installation you
encounter problems, consult "Appendix A: Troubleshooting."

Windows XP Driver Installation

1. If you haven't already, start your computer.
2. Windows XP will automatically detect the Adapter connected to your
computer and display the Welcome to the Found New Hardware Wizard
screen. Select Install from a list or specific location (Advanced), and
insert the Driver CD into the CD-ROM drive. Then click the Next button.
Note: Throughout this guide, it is assumed that "D" is the letter of
your CD-ROM drive.
Figure 8-1
25