Store/Edit Tour - Dedicated Micros Dennard 2040 Manual

Select 'No' to use the default names or 'Yes' to enter a new name through the following screen.
ABCDEFGHIJKLMNOPQRSTUVWX
YZ a b c d e f g h i j k l m n o p q r s t u v
w x y z 0 1 2 3 4 5 6 7 8 9 : / * = + . -
Backspace
Return Without Change
Accept Entry
_ _ _ _ _ _ _ _ _ _ _ _
The title choice is made as usual with the cursor and accepted when ready (which will store the
chosen Title with the stored Preset position). Backspace allows a correction to be made while
'Return without change' will store the Preset position with the default title. The title appears in the _
_ space as it is compiled.
Note that the '_' symbols indicate where the title will appear - they do not appear on-screen

4.3.2 Store/Edit Tour

A Tour is a predefined journey taken by the camera, between a number of Preset positions. Before
accessing this facility, ensure that all the required Preset positions have been stored, as shown in
section 4.3.1. Choosing to program a Tour first requires the Tour Number to be entered in an
identical procedure to selecting a Position (except that the range must lie between 001 and 100).
Once the number has been accepted, a subsidiary menu is displayed:
Item _ _ _ in tour _ _ _
P P P D D T T
Old _ _ _ _ _ _ _
New _ _ _ _ _ _ _
0 1 2 3 4 5 6 7 8 9
Accept Entry
Clear Entry
Return Without Change
Store Tour
If a tour has already been established on this number its initial data is displayed as 'Old'. This data
can be edited by adding new values or a new tour can be established.
Here the entry format follows the now-familiar procedure but the _ _ _ characters have specific
functions: The first three characters, PPP, represent a Preset position number. 'DD' is the dwell
time that the camera must spend stationary at that position and 'SS' represents the time that the
camera must take to reach the next position in the tour. The times are entered as seconds,
between 01 and 99. If no value is entered, the Tour will use the default values of 2 seconds dwell
time and 3 seconds travel time.
When all characters are completed and then accepted, the display clears the entry ready to receive
the next position information and the 'Item' counter is incremented. When all entries are complete,
select the 'Store Tour' instruction.
Dennard 2040 / 2060 Menu System Manual
All manuals and user guides at all-guides.com
Page. 16