Blades Assembly; Connections Panel Assembly - Create WIND FOLD Manual De Instrucciones

B L A DE S AS SE MB LY
• Align the holes in the fan blade holder with the holes in the fan blades and motor body
and screw them into place, but do not tighten until they are all in place and screwed down.
Tip: To save time, you can put the washers on each screw before installing the blades.
1
• Lock the fan blade to the iron plate A with screws. Do not lock it tightly until three blades
have been attached.
• Fasten the iron plate B to the motor with screws. Do not lock it tightly until all iron plates
B are attached.
• Install the blades on the motor and go to the next step.
C O NNECTI ONS PANE L AS SE MB LY
Hook the connection plate to the bottom of the fan by inserting the screw heads into the
designated holes. Screw in the screws and then secure.
Blade
Iron sheet
Screw
Patch panel
Connection panel
screw
2
Screw
E NGLI SH
11