Making Coffee With A Preset Time; Deactivating The Preset Time - Beem CLASSIC SELECTION CJ-656B Manual De Instrucciones

29
9. To remove coffee, carefully press a glass or a coffee mug against the coffee dispenser (6).
After the preset duration of the keep-warm function has expired, the device automatically
switches to stand-by mode. The operating lamp in the
goes out.
Warming Up Coffee
To warm coffee up again, press
down for approx. 3 seconds. The preset time for the keep-warm function is activated again and
the coffee is reheated (see the "Handling and Operation" chapter – "Keep-Warm Function").
Making Iced Coffee
1. Prepare the coffee machine, add coffee powder, pour in water, insert a fi lter and if neces-
sary set the brew strength and the keep-warm function (see the previous chapter). When
you do this, make sure that the tank is fi lled for no more than 6 cups!
The coffee needs to be brewed stronger for iced coffee. We recommend two heaped
measuring spoons for each 125 ml cup.
2. Fill the coffee tank (2) up to the 10-cup mark on the fi ll-level indicator with ice cubes.
3. Set the keep-warm function to the 0 setting using the WARMHALTEN (keep warm)
button (12) (see the "Handling and Operation" chapter – "Keep-Warm Function").

Making Coffee with a Preset Time

1. Prepare the coffee machine, add coffee powder, pour in water, insert a fi lter and if
necessary set the brew strength and the keep-warm function (see the previous chapter).
2. Hold down the TIMER button (11). The time display 19:99 fl ashes on the display (10).
3. Use the buttons S (14) and M (13) to set the start time you want (see the "Handling and
Operation" chapter – "Time").
4. Let go of the TIMER button.
5. To activate the preset time, press the TIMER button again. A beep sounds, the operating
lamp in the button lights up and START TIMER appears on the display. The preset time is
activated.
Once the preset time is reached, the device switches on automatically. The operating lamp in the
TIMER button goes out and the operating lamp in the
lights up.

Deactivating the Preset Time

To deactivate the preset time setting again, press the TIMER button (11). The operating lamp
in the button goes out and the programming is deactivated. However, the preset time is saved
until a new time is programmed in or the device has been disconnected from the power supply.
03840_DE-EN-FR-ES-IT_Inlay_A5_V3.indb 29 03840_DE-EN-FR-ES-IT_Inlay_A5_V3.indb 29
START / STOPP (start / stop)
theSTART / STOPP (start / stop)
START / STOPP (start / stop)
button
button (16) and hold it
button (16)
16.01.2019 09:44:22 16.01.2019 09:44:22
EN