Maintenance; Cleaning - Sagola PACK 6000X Manual De Instrucciones

11. Maintenance

Before starting, check the condition of the air hose as well as the connections of the components
through which the air flows.
To perform maintenance or repair work, previously disconnect the equipment from the compres-
sedair grid and the mains and depressurise it.
The maintenance and repair works of the equipment must only be carried out by personnel au-
thorised by SAGOLA, S.A.U.
The equipment by its own construction and design does not require any periodic maintenance.
A qualified specialist is also required to change the factory "default" settings, when so required.
The use of thermal gloves resistant up to 200°C is compulsory for the handling of
the equipment, even when working with lower temperatures, to ensure the health
and safety of the operator in the event of an eventual failure of the temperature
sensor.
FOR ALL THESE CASES WE RECOMMEND THE INTERVENTION OF
SAGOLA`S TECHNICAL ASSISTANCE SERVICE (TAS)
SAGOLA reserves itself the right to not authorise the performance of certain tasks on the equi-
pment.
It is essential to perform a regular review of the equipment to verify the condition of its compo-
nents and replace these when they are not in perfect condition.
TO OBTAIN THE BEST POSSIBLE RESULTS ALWAYS USE ORIGINAL
SAGOLA SPARE PARTS

12. Cleaning

Regularly clean the equipment, especially the pilot lights and the protective cover of the control
keys. Keep them sufficiently visible.
Keep free of foreign objects the air passage closure areas.
Do not use hard or sharp objects.
ENGLISH