Disposal - Sagola PACK 6000X Manual De Instrucciones

The use of solvents and/or detergents that contain halogenated hydro-
carbons (trichloroethane, methyl chloride, etc.), may cause chemical
reactions in the unit as well as in its zinc-coated components (trichloroe-
thane mixed with small amounts of water produces hydrochloric acid).
For this reason, these components may rust and in extreme cases the
chemical reaction caused may be explosive. We recommend you to use
products that do not contain the aforementioned components. Do not
use acids, soda (alkalis or pickling substances, etc.) for cleaning under
any circumstances.
In general, tprecautions must be taken whenever the unit is handled, in order to prevent any
damage to this.
Connectors must be securely tightened and in good condition. If pneumatic connectors are
fitted, they must comply with the standard ISO 4414:2010.
Safety standards must be understood and applied.
Any non-compliance with the indications set out in this manual may lead to incidents affecting
the physical integrity of the user or other personnel or animals.
Respect and comply with indications relating to the conservation of the environment.
Always keep the safety sheets for the products to apply and the cleaning liquids to hand in case
you need to consult them.

14. Disposal

For complete and correct disposal of the pistol, when it has reached the end of its
useful life, it must be completely dismantled so it can be recycled, separating the
metal components, the plastics, the electronics and the glass.
Take into account that the Temperature controller is made up of substances and preparations
that are harmful to the environment, as well as human health. These components must be re-
moved at reuse centres or waste treatment and recycling facilities, for neutralisation or reus.
ENGLISH