Publicidad
Idiomas disponibles
Idiomas disponibles
Information on the package of
the product
0.5%
50ml for 10l of
water
1%
100 ml for 10l
of water
2%
200 ml for 10l
of water
3%
300 ml for 10l
of water
• Fill the appropriate product into the dosing cup and pour
the content into the fresh water tank (Flextank). Repeat the
procedure until the required dosing is reached.
• The dosing cup remains in the Flextank after dosage.
Notice:
TASKI offers an automatic dosage feature as an op-
tion.
It is possible to mount it additionally.
- Please contact your customer service.
Pre-cleaning
Warning:
Remove any objects (wooden, metal parts etc.)
from the cleaning surface.
The objects could be catapulted by the rotating tool, and
thereby cause injuries to people and damage to the en-
vironment.
Beginning work with the machine
Caution:
Always wear slip-resistant shoes and appropriate
working clothes when working with this machine!
Caution:
To ensure safe operation, always keep both hands
on the steering wheel/driving handle while operat-
ing the machine.
Caution:
When driving the machine for the first time, test it
out in an empty space to get familiar with the ma-
chine.
Warning:
Before beginning work (in the work position), check
whether your field of vision is sufficient to ensure
safe working. EN 3411 must be adhered to.
An insufficient field of vision can make work difficult and
therefore impair safety for the operator, machine, and
third parties.
Warning:
While working, pay attention to the maximum clear-
ance height for doors and underpasses shown on
the warning sign on the machine.
10
Tank capacity Product vol-
ume per tank
filling
92l
0.46l
92l
0.92l
92l
1.84l
92l
2.76l
Danger:
If there is a danger of falling objects while the ma-
chine is in use, the necessary safety precautions
must be taken or adhered to in accordance with na-
tional regulations.
Notice:
When working in public buildings, the warning light
must be switched on.
• Sit down on the driver seat.
• Check whether the emergency stop button is released.
• Switch on the machine (key switch).
The indicator elements will light up briefly.
Manual program start
Notice:
The cleaning program last used is saved in the
memory.
• Press the Suction unit ON/OFF but-
ton.
The display lights up, the suction mo-
tor starts and the squeegee is auto-
matically lowered to the operating
position.
• Press the Cleaning solution supply
ON/OFF button.
The display lights up.
The cleaning solution supply is start-
ed when the brushes rotate.
• Select the desired dosing by press-
ing the +/- buttons from level 1-7.
Notice:
Diversey recommends a sustainable working by de-
termination of the correct product dosing quantity.
Overdosing or underdosing will lead to unsatisfactory
cleaning results.
Notice:
TASKI offers an automatic dosage feature as an op-
tion. It is possible to mount it additionally.
- Please contact your customer service.
• Press the Brush drive ON/OFF but-
ton.
The display lights up, the brush unit
is lowered and the engaging process
starts automatically.
• Select the desired brush pressure by
pressing the +/- buttons from level 1-
4.
Notice:
Always calculate and select the lowest level that is
sufficient for good cleaning results.
Thus you will optimize power consumption and increase
the service life of the machine.
Publicidad
