Descargar Imprimir esta página

Changing Batteries - Eschenbach Scribolux Instrucciones De Uso

Ocultar thumbs Ver también para Scribolux:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 17
y The product is a Class I medical device (non-
sterile, without measuring function) and
complies with Regulation (EU) 2017/745. For
use of the product outside the EU member
states, the respective country-specific direc-
tives must be observed.
Use
Place the standing magnifier on the reading material
so that the lens [a] points towards you.
Switch the lamp on by pressing the button [b]. Press-
ing the button again will switch off the lamp. The
lamp will switch off automatically after 30 minutes to
conserve battery power. If you still require the lamp,
you can simply switch it back on.
Use the most comfortable distance between your eye
and standing magnifier. It is dependent on the reading
glasses being used and your eyes' adaptability.
Switch off the lamp when done.
Use with adapter
For a more convenient diagonal view, you can use the
scribolux with the supplied adapter. Simply place the
scribolux onto the adapter as shown on p. 3 with the
tips of the stand in the adapter. Then press the back of
the appliance gently downwards.

Changing batteries

Open the battery compartment [c] as shown in the
figure on page 2 by pulling it upwards from standing
magnifier.
Now remove the exhausted batteries and insert new
batteries as shown in the diagram.
y You need 3 batteries, type Mignon (AA/
LR6)/1.5V. Always insert three new batteries
of the same type. Note the position of the
respective positive pole (+).
The proper polarities are indicated in the battery case.
Close the battery case by placing it on the standing
magnifier [d] and sliding it down until it snaps tight.
- 9 -

Publicidad

loading

Este manual también es adecuado para:

156512