Mounting Of The Canopy; Blade Assembly - Create WIND BALL Manual Del Usuario

Idiomas disponibles

MOU NT IN G OF THE CANO PY

• Lift the canopy up to the mounting bracket and align the loosened screws on the mounting

bracket with the holes in the canopy.

• Rotate the canopy to adjust it. Reinsert the screws and fix them with a screwdriver.

• Once you have the mounting bracket secured to the junction box you can proceed to hang

the fan.

• Hold the fan firmly with both hands. Thread the bar through the opening in the mounting

bracket and let the ball rest on the mounting bracket.

• Rotate the ball coupling until it lines up with the tab on the mounting bracket.

Tip: Another person should help you hold the ladder and hand you the fan once you've

climbed the ladder.

B L ADE AS SE MB LY

Align the holes in the blade holder with the holes in the blades and in the motor body

and screw them into place, but do not tighten the screws until they are all in place and

screwed on.

Tip: To save time, you can put the washers on each screw before you install the blades.

E NGL I SH

Tabla de Contenido