Mopar 82212502 Instrucciones De Montaje página 16

16
CAUTION: Do not use acid core solder.
73. Using a solder tool (3), solder the connection (2) to­
gether with rosin core solder (1).
74. Center the heat shrink tubing (2) over the solder joint
and heat using a heat gun. Heat the joint until the tub­
ing is tightly sealed and sealant (1) comes out of both
ends of the tubing.
75. Crimp/splice the backup camera ground wire (BK) to
the ground (BK) of the 12V ignition power outlet wiring
harness connector as above.
Jun 30, 2011
All manuals and user guides at all-guides.com
K6861197