Mopar 82212502 Instrucciones De Montaje página 8

8
26. Using Trim Stick C­4755 gently pry up on the liftgate
scuff plate to release the retaining clips (1).
27. Carefully disengage the scuff plate end tabs (4) from
the left and right quarter trim panels (5).
28. Remove the liftgate scuff plate (3) from the liftgate
opening.
29. Remove the rear header trim screw covers (3) and re­
taining screws.
NOTE: While removing rear header trim (2), carefully
route the shoulder harness (1) from the rear header
trim (2).
30. Using Trim Stick C­4755 gently pry down on the rear
header trim (2) to release the snap retainers and re­
move the rear header trim (2).
31. Using Trim Stick C­4755 disengage the front and rear
quarter trim bolster retaining clips (1).
32. Carefully disengage the quarter trim bolster upper re­
taining tabs (2) by lifting the bottom edge of the bolster.
33. Continue pulling the quarter trim bolster away from the
quarter trim panel to disengage the quarter trim bolster
locating tabs (4).
34. Slide the rear seat belt (3) out of the slot in the quarter
trim bolster.
35. Remove the quarter trim bolster (5).
Jun 30, 2011
All manuals and user guides at all-guides.com
K6861197