Mopar 82212502 Instrucciones De Montaje página 24

24
121. Position the upper D­pillar trim into the liftgate open­
ing.
122. Connect the power liftgate D­Pillar switch and third
row power folding seat switch electrical connectors (3)
(if equipped).
123. Carefully engage the upper D­pillar trim end tab (5)
into the rear header trim plate.
124. Push the upper D­pillar trim onto the D­Pillar to en­
gage the trim retaining clips (2).
125. Position the liftgate scuff plate (3) into the liftgate
opening.
126. Carefully engage the scuff plate end tabs (4) into the
left and right quarter trim panels (5).
127. Push the liftgate scuff plate down onto the liftgate
opening to engage the scuff plate retaining clips (1).
NOTE: While installing rear header trim (2), carefully
route the shoulder harness (1) into the rear header
trim (2).
128. Install the rear header trim (2) and seat snap retain­
ers.
129. Install the retaining screws and trim screw covers (3).
Jun 30, 2011
All manuals and user guides at all-guides.com
K6861197