Harbor Breeze E-PEN44BCW5MC Manual De Instrucciones página 13

FINAL INSTALLATION
2. Partially insert three blade screws (BB), along with
three blade washers (DD), to attach one blade arm
(H) to a blade (I). Then, tighten each blade screw
(BB) starting with the one in the middle. (Fig. 2)
Repeat with remaining blades (I).
3. Insert two motor screws (AA), along with lock
washers (CC), through one blade arm (H) to attach
blade arm (H) to motor. Tighten motor screws (AA)
securely. (Fig. 3) Repeat with remaining blade arms
(H), making sure to completely secure each blade arm
(H) before proceeding with the next.
4. If you do NOT wish to use the light kit, proceed
to Step 10 to attach pull chain extension (J) for fan
and finalize installation without light kit.
If you wish to USE the light kit, remove three
screws (along with star washers) from switch
housing and remove switch housing cap (F). Locate
BLUE and WHITE wires in switch housing labeled
FOR LIGHT and remove plastic from these two
wires. (Fig. 4) Continue with Step 5.
All manuals and user guides at all-guides.com
13
BB
DD
H
Hardware Used
3/16 Blade Screw
BB
DD
Blade Washer
CC
AA
Hardware Used
Motor Screw
AA
CC
5.4 M/M Lock Washer
Fig. 4
E
Screw and
Star Washer
Fig. 2
I
x 15
x 15
Fig. 3
E
H
x 10
x 10
Switch
Housing
F