Publicidad
Idiomas disponibles
Idiomas disponibles
CLOSEMOUNT STYLE FAN MOUNTING
2. Pull wires through hole in the middle of the canopy
(B) and attach canopy (B) to motor housing (E) using
the three screws (KK) and three lock washers (LL)
provided. (Fig. 2)
3. Hang motor housing (E) on the tab on the
mounting bracket (C) using one of the non-slotted
holes in the canopy (B). (Fig. 3)
WIRING
WARNING: To reduce the risk of fire, electrical
shock, or personal injury, wire connectors provided
with this fan are designed to accept only one 12 gauge
house wire and two lead wires from the fan. If your
house wire is larger than 12 gauge or there is more
than one house wire to connect to the two fan lead
wires, consult an electrician for the proper size wire
connectors to use.
CAUTION: Be sure outlet box is properly
grounded and that a ground (green or bare) wire is
present.
WARNING: If house wires are different colors
than referred to in the following steps, stop immediately.
A professional electrician is recommended to determine
wiring.
All manuals and user guides at all-guides.com
Hardware Used
KK
3/16 X 11 mm Screw
LL
5 mm Lock Washer
C
10
Fig. 2
B
KK
LL
E
x 3
x 3
Fig. 3
Tab
E
E
Publicidad
