Publicidad
Idiomas disponibles
Idiomas disponibles
PREPARATION
1. Before beginning assembly, installation or operation of product, make sure all parts are
present. Compare parts with package contents list and diagram above. If any part is missing or
damaged, do not attempt to assemble, install or operate the product.
Estimated Assembly Time: 120 minutes
Tools Required for Assembly (not included):
electrical
tape
Helpful Tools (not included):
A/C tester
light
Bulbs Required (included):
3 candelabra base
60 watt max. bulbs
DANGER: When using an existing outlet box, make sure the outlet box is securely
attached to the building structure and can support the full weight of the fan. Failure to do this can
result in serious injury or death. The stability of the outlet box is essential in minimizing wobble
and noise in the fan after installation is complete.
CAUTION: Be sure outlet box is properly grounded and that a ground (green or bare) wire
is present.
2. After opening top of carton, remove mounting hardware package from foam inserts. Remove
motor from packing and place on carpet or on foam to avoid damage to finish.
CAUTION: Carefully check all screws, bolts and nuts on fan motor assembly to ensure that
they are secured.
INITIAL INSTALLATION
1. Turn off circuit breakers and wall switch to the fan supply
line leads. (Fig. 1)
DANGER:
to installation may result in serious injury or death.
2. Determine mounting method to use. (Fig. 2)
A. Downrod mount (normal or angled ceiling)
B. Closemount (normal ceiling only)
Important: If using the angle mount, check to make sure
the ceiling angle is not steeper than 19°.
All manuals and user guides at all-guides.com
Phillips
screwdriver
tape
do-it-yourself wiring handbook
measure
A-15
Failure to disconnect power supply prior
pliers
safety
glasses
(available at Lowe's)
6
stepladder
wire
strippers
wire cutters
Fig. 1
Fig. 2
A
B
Publicidad
