Necessary Tool; Scope Of Delivery - Waeco PerfectView CAM26W Instrucciones De Montaje Y De Servicio

Collected_RV-HD-Compact_Q4
Do not open the equipment since this impairs the tightness and the operability (see A 7).
Do not pull at the cables since this could impair the tightness and the operability of the
components (see A 8.)
The product and its components are not suitable for the operation under water (see A 9).
The following are required for the installation:
– Scale (ruler)
– prick punch
– hammer
– drill
The following are required for the electrical connection and the check:
– diode test lamp
– or voltmeter
– crimp pliers
– insulating tape
Subject to your individual assembly, you will probably need still more screws, nuts, was-
hers, metal screws and cable-clips than those contained in the scope of delivery for the
fastening of the camera and monitor.
No. Quantity
1 1
1.1 1
1.2 1
1.3 1
1.4 2
1.5 1
2 1
2.1 1
2.2 1
2.3 1
2.4 1
Subject to technical changes!
30/06/03
All manuals and user guides at all-guides.com
General safety and installation instructions
Tools required
(see B 1)
(see B 2)
(see B 3)
(see B 4)
(see B 8)
(see B 9)
(see B 10)

Scope of delivery

Designation
Monitor-Kit RV-50-PAL (see C)
Monitor
Glaring protection
Monitor holder
Covering caps
Wiring harness
Assembly set: monitor
Kamera-Kit RV-26 (siehe C)
Camera
Camera holder
Camera protection
System cable 20 m
Assembly set: camera
11:00 Page 36
– drilling machine
– screwdriver
– screwdriver
– heat shrink hose
– hot-air drier
– hatchet iron
– soldering tin
36
(see B 5)
(see B 6)
(see B 7)
(see B 11)
(see B 12)
(see B 13)