Denon AVC-A1SR Instrucciones De Operación página 26

ENGLISH
3
MAIN UNIT:
Turn the CONTROL knob to
adjust the level of the selected
speaker.
REMOTE CONTROL UNIT:
Move jog stick "ENTER" back
and forth to adjust the level of
the selected speaker.
SW channel level can be
(Remote control unit)
turned off by decreasing
one step from –12 dB.
Fader function
• This function makes it possible to lower the volume of the front channels (FL, C and FR) or the rear channels
(SL, SR, SBL and SBR) together. Use it for example to adjust the balance of the sound from the different
positions when playing multi-channel music sources.
1
MAIN UNIT:
Select "FADER" using the
FUNCTION knob after
selecting "CH. VOL" with
the MODE SELECT button.
REMOTE CONTROL UNIT:
Select "FADER".
(Remote control unit)
FL C FR SR SBR
FADER SW SL
2
MAIN UNIT:
Turn the CONTROL knob
clockwise to adjust the volume
of the surround side
collectively. Turn the CONTROL
knob counterclockwise to adjust
the volume of the front side
collectively.
REMOTE CONTROL UNIT:
Move jog stick "ENTER" to the
right side to adjust the volume of
the surround side collectively.
Move jog stick "ENTER" to the
left side to adjust the volume
of the front side collectively.
The fader function does not affect the SW.
The channel whose channel level is adjusted lowest can be faded to –12 dB using the fader function.
If the channel levels are adjusted separately after adjusting the fader, the fader adjustment values are cleared,
so adjust the fader again.
26
4
REMOTE CONTROL UNIT:
CONTROL
Once the channel level
completed, press the CURSOR/PAGE button
again so that the display is no longer
highlighted, then press the CH. SELECT button.
(Main unit)
(Remote control unit)
When the surround back speaker setting is set to
"1spkr" for "Speaker Configuration", this is set to
"SB".
FUNCTION
(Main unit)
SBL
CONTROL
2
(Main unit)
(Remote
This is only displayed when setting the fader control.
control unit)
Playing modes for different sources
adjustment is
The AVC-A1SR is equipped with many surround modes. We recommend using the surround modes as described
below in order to achieve the maximum effect for the specific signal source.
Sources recorded in
Dolby Digital Surround EX
Sources recorded in DTS-ES
NOTE:
Surround modes indicated with an
asterisk (*) require the use of two
surround back speakers.
Dolby Digital
or
5.1 ch sources
DTS Surround
2 ch sources recorded in
Dolby Surround
2
Sources recorded in stereo
Sources recorded in monaural
1
• Though we recommend selecting the surround mode as described above, other surround modes can also
be selected.
is a 6.1-channel/7.1-channel surround mode.
THX SURROUND EX
• Maximum performance for playing movies on the AVC-A1SR.
DOLBY DIGITAL EX
• This mode is optimized for playing sources recorded in Dolby Digital Surround EX.
DTS-ES DSCRT 6.1, MTRX 6.1
• This is the optimum mode for playing sources recorded in DTS-ES.
THX DSCRT 6.1, MTRX 6.1
• When playing movies, setting this mode sometimes results in a more
natural sound. Select the mode as desired.
THX Ultra2 CINEMA* and THX MUSIC MODE*
• These modes are suited for playing 5.1-channel sources in 7.1 channels.
Select the desired surround mode for the movie and music sources.
WIDE SCREEN
• Effective for 2-channel sources recorded in Dolby Surround or for 7.1-channel
playback with 5.1-channel sources.
HOME THX CINEMA (THX 5.1)
• This mode is optimized for playing 5.1-channel movies.
• For sources recorded in Dolby Surround as well, this mode provides the
same power as with 5.1-channel sources.
DOLBY DIGITAL / DTS SURROUND / DTS 96/24
• This mode is optimized for playing 5.1-channel music.
• For Dolby surround recording sources, Dolby Pro-Logic II playback is
conducted.
PURE DIRECT
• By suspending all the video circuits, analog input music playback can be
played with optimum quality. (The video outputs do not operate.)
DIRECT / STEREO
• Effective for achieving pure playback
• If there is no need for tone control or distribution of the low frequencies in
function of the speaker configuration, select the DIRECT mode to achieve the
best sound quality.
DENON Original Surround Modes (see page 32)
• Select these for 7.1-channel playback with sources recorded in stereo or
monaural.
• The effects are different for each of the surround modes.
Select the one most suited for the source being used.
DTS NEO:6
• This is a surround mode for playing 6.1- or 7.1-channel stereo sources
developed by Digital Theater Systems.
• One of two playing modes, MUSIC (for music sources) or CINEMA
(for movie sources), can be selected according to your preferences.
DOLBY PROLOGIC II
• This surround mode plays stereo sources developed by Dolby Laboratories
in 5.1 channels.
• Select one of the three playback modes according to your tastes.