Recommended Combinations - GYS MULTIPEARL AUTO Manual De Instrucciones

Translation of the original instructions
GAS CONNECTION
The device is designed with a quick release gas connection. Use the adaptor supplied with the machine.
Type of wire FE
MAG
Process
Ar+CO²
Gas
0.6 - 0.8
Ø available
- 1.0
Welding
All
position

RECOMMENDED COMBINATIONS

(mm)
0.8-2
2-4
0.6-1.5
1.5-3
3-8
RISK OF INJURY DUE TO MOVING PARTS
The wire feeders contain moving parts that may catch hand, hair, clothes or tools which can lead to injuries! Take
extra care.
• Do not lay a hand to swivel or moving components or parts to the drive!
• Ensure that the housing covers or protective covers remain closed during operation!
• Do not wear gloves when feeding the wire through or changing reel.
MMA
• Selecting MMA mode
• Welding current adjustment
• Arc Force adjustment
24
MULTIPEARL AUTO
FE ALG 5 SS
MAG MIG MAG
CO² Ar
Ar+CO² 2%
0.6 - 0.8
0.8 - 1.0 0.8 - 1.0
- 1.0
All All All
Current (A)
20-100
100-200
15-80
80-150
150-300
Keep button 2 pressed and at the same
time turn the upper knob to select MMA
mode.
Turn the upper knob to select the wel-
ding current.
Turn the lower knob to adjust the Arc
Force.
Adjustable from 0 to 100%
FC CuSi 3 CuSi 8
MAG MIG
Ar
0.9 -1.2 0.8 0.8 - 1.0
All Flat
Ø Wire (mm) Ø Nozzle (mm)
0.8
1.0
0.6
0.8
1.0/1.2
CuAL ALSi 5
MIG MIG MIG
Ar Ar Ar
0.8 1.0
Flat Flat All
Flow rate L/min
12 10-12
12-15 12-15
12 8-10
12-15 10-12
15-16 12-15
+
EN
ALSi 12
MIG
Ar
1.0
All