Safety Information - Fulgor Milano FBR 300 F ED Manual De Usuario

1 - Safety Information

EN
Please read the operating and installation
instructions carefully!
They contain important information on how
to install, use and maintain the appliance.
The manufacturer is not liable if you fail to
comply with the instructions and warnings.
Retain all documents for subsequent use or
for the next owner.
• Do not connect the appliance to the
electricity supply until all packing
and transit protectors have been
removed. Keep children away from
packaging and its parts. Danger of
suffocation from folding cartons
and plastic film!
• Leave to stand for at least 4 hours
before switching on the product,
to allow compressor oil to settle if
transported horizontally.
• Make sure there is no transport
damage.
• Do not damage the refrigerant
circuit.
• Maintain the ventilation openings
in the appliance enclosure or
in the built-in structure, free of
obstruction.
• Never use water to wash the
compressor position, wipe it with a
dry cloth thoroughly after cleaning
to prevent rust.
• Handle the appliance always with
at least two persons because it is
heavy.
• Install and level the appliance in an
area suitable for its size and use.
• Make sure that the electrical
information on the rating plate
agrees with the power supply. If it
does not, contact an electrician.
• The appliance is operated by a
220-240 VAC/50 Hz power supply.
Abnormal voltage fluctuation may
2
cause the appliance to fail to start, or
damage to the temperature control
or compressor, or there may be an
abnormal noise when operating. In
such case, an automatic regulator
shall be mounted.
• Only for UK: The appliance's
power cable is fitted with 3-cord
(grounding) plug that fits a standard
3-cord (grounded) socket. Never
cut off or dismount the third pin
(grounding). After the appliance
is installed, the plug should be
accessible.
• Make sure that mains cable is not
caught under the appliance during
and after carrying/moving the
appliance, to avoid the mains cable
becoming cut or damaged. If the
supply cord is damaged, it must be
replaced by the manufacturer, its
service agent or similarly qualified
person in order to avoid a hazard.
• Do not install the appliance in
humid, oily or dusty places, nor
expose it to direct sunlight and to
water.
• Do not install the appliance near
heaters or inflammable materials.
• FOR appliances with a freezer
compartment: if there is a power
failure do not open the lid. Frozen
food should not be affected if
the failure lasts for less than the
hours indicated on the rating label
(Temperature rise time). If the failure
is longer, then the food should be
checked and eaten immediately or
cooked and then refrozen.
• If you find that the lid of the
appliance is difficult to open just
after you have closed it, don't
worry. This is due to the pressure
difference which will equalize and