Before First Use - Fulgor Milano FBR 300 F ED Manual De Usuario

2 - Before first use

EN
You must allow the fridge to settle for at least four
hours prior to switching the power on.
It is recommended that you clean the interior of the appliance
prior to first use, using a solution of bicarbonate of soda and
warm water and then thoroughly drying the interior.
The fridge may have an odor to it at first use. This will disappear
as the appliance cools.
Please note:
The appliance will start on temperature setting 3 and work
continuously until it comes down to the correct temperature.
If the appliance is switched off, you should allow five minutes
before switching it on again to prevent unnecessary damage
to the compressor.
Never store inflammable or explosive items and strong
corrosive acids or alkalis in the appliance.
This fridge cools your food by making the inside back of the
cavity cold. It is normal for frost to build up on this surface; it
then dissipates and drains through a small drain at the bottom,
where it evaporates harmlessly. The presence of frosting at the
back is not a malfunction of the fridge.
6