Publicidad
Idiomas disponibles
Idiomas disponibles
DISASSEMBLY OF CONTINUOUS-FEED
CHUTE PARTS
ALWAYS UNPLUG THE CORD BEFORE DISASSEMBLING.
• Turn the cover clockwise until the safety interlock tab on the
cover is disengaged from the safety interlock switch on the
chute, and the tabs are clear of the tabs on the cover.
• Remove the large food pusher from the feed tube. Remove the
small pusher from the large pusher.
• Remove the continuous-feed chute from the motor base. If the
chute is pointing in the 4-o'clock position, just lift it up. If not,
rotate clockwise to disengage the tabs on the bottom of the
chute platform (motor base) from the slots on the bottom of the
continuous-feed chute.
• Use caution removing accessory discs, as the blades are
very sharp.
OPERATING THE CONTROLS
• Plug the machine into an electrical outlet.
• There are three control buttons on the base unit.
The three controls are:
How they work:
ON
OFF
PULSE
ON:
Press the ON button to start
the motor.
OFF:
Press the OFF button to stop
the motor.
PULSE: To pulse the motor, press the
PULSE button down, then
release. The motor will run as
long as you hold the button
down; it stops when you
release the button.
12
Publicidad
