Setting The Timer; Setting The Temperature - Silvercrest SKMH 1100 A1 Instrucciones De Servicio

RP114279 Küchenmaschine mit Heizung LB5 Seite 85 Montag, 12. Januar 2015 11:02 11
– the operating indicator 7 will light up
red;
– the display 8 will light up and show all
the control symbols. All the adjustable
values are set to "0".
– An audible signal sounds.
6.2 Displays
All the settings and operating values are
shown on the display 8.
The display 8 illumination will go out after a
certain time. As soon as you press one of the
buttons or turn one of the controls the
display 8 will light up again.
The operating indicator 7 shows the current
state of the appliance:
– red: Appliance is connected to the
power supply but is not in operation
– blue: Appliance is in operation

6.3 Setting the timer

You can use the "TIME" controller 10 to set
how long cooking or processing is to take:
Timer "-"10: reducing the time
Timer "+" 10: increasing the time
— You can set up times between 1 second
and 60 minutes.
— The currently set time is shown on the
display 8
— when the function is started the time
begins counting down;
— the time can be modified while the
appliance is in operation;
— Once the set time has elapsed:
– the appliance stops;
– an alarm is heard.

6.4 Setting the temperature

You set the cooking temperature by turning
the "TEMP" temperature controller 13:
— You can set up temperatures between
37 °C and 100 °C;
— The currently set temperature is shown
on the display 8
— As soon as the selected
temperature is reached,
the appliance emits an
audible signal and
displays an appropriate
symbol;
— The temperature can be modified while
the appliance is in operation;
— If you select a speed setting higher than
3, the heating function will be disabled
and no temperature can be set up.
85