End Of Trimming Job; Disconnection Of The Fast Connector; Protection Of The Blade - pellenc HELION 2 Manual De Instrucciones

5.6. END OF TRIMMING JOB

5.6.1. DISCONNECTION OF THE FAST CONNECTOR

At the end of the trimming job:
• Disconnect the connector
• Replace the connector cap
• Turn off the battery
Important
Do not manipulate the connector retractable ring. If
the ring is damaged, replace the cable.
To prevent particles from entering the connector,
make sure to replace the cap.
Note
To prolong the life of the connector, it is advisable to protect it when in the unplugged:
• Firstly, on the tool by systematically repositioning the connector cap to protect the connection area and
prevent the entry of foreign bodies.
• Secondly, on the cord by avoiding contact of the connector with abrasive or dirty surfaces, or subjecting it
to significant shocks (falls).

5.6.2. PROTECTION OF THE BLADE

Note
Cover the blade with the sheath in all of the following situations: transport, adjustment, handling and storage
of the tool.
ELECTRIC HEDGE-TRIMMER HELION 2 COMPACT
54_117575-J
55