Sharpening The Blades - pellenc HELION 2 Manual De Instrucciones

3. Grease the reducer with the grease gun (20g max-
imum grease) recommended by PELLENC (ref.
74588 supplied with the hedge trimmer blade or ref.
115174).
4. Refit the screw.
5. Tighten to a torque of 3 N.m using a T25 Torx screw-
driver.
Note
The hedge-trimmer blade gears must be lubricated after the first 25 hours of operation and every 50 hours
thereafter.

6.7. SHARPENING THE BLADES

Sharpen the blades a little but often. Regularly check how
sharp the blades are for the first few hours to determine
the required frequency of sharpening.
Ensure the blade is at a 45° angle during sharpening.
Caution
Always disconnect the hedge-trim-
mer from the battery before working
on the blades.
ELECTRIC HEDGE-TRIMMER HELION 2 COMPACT
54_117575-J
61