Personal Safety - Royal Catering RCEG-51R Manual De Instrucciones

i) Keep these instructions for use for future reference. If the unit is to be passed
on to a third party, the operating instructions must also be handed over
together with the unit.
j) Keep the packaging and small assembly parts out of the reach of children.
k) Keep the unit away from children and animals.
l) When using this unit together with other units, also follow the other
instructions for use.
Please note! Keep children and other bystanders safe while operating the
unit.
2.3.

Personal safety

a) Do not operate this product if you are tired, ill or under the influence of
alcohol, drugs or medication that could impair your ability to operate the
product.
b) The unit is not intended to be used by persons (including children) with
reduced mental, sensory or intellectual functions or persons who lack
experience and/or knowledge unless they are supervised or have been
instructed by a person responsible for their safety on how to operate the unit.
c) Use caution and common sense when operating this unit. A moment's
inattention during operation may result in serious personal injury.
d) To prevent accidental start-up, make sure the switch is in the off position
before connecting to a power source.
e) Do not overestimate your capabilities. Maintain body balance and equilibrium
at all times during operation. This allows for better control of the unit in
unexpected situations.
f) The unit is not a toy. Children should be watched to ensure that they do not
play with the unit.
2.4. Safe use of the unit
a) Disconnect the unit from the power supply before adjusting, cleaning, or
servicing. This precaution reduces the risk of accidental start-up.
b) Keep the unit in good working condition. Check before each use for general
damage or damage to moving parts (cracks in parts and components or any
other condition that may affect the safe operation of the unit). If damaged,
have the unit repaired before use.
c) Keep the unit out of the reach of children.
d) Repairs and maintenance should be carried out by qualified personnel using
only original spare parts. This will ensure the safety of use.
e) To ensure the designed operational integrity of the unit, do not remove
factory-installed covers or loosen screws.