Publicidad
Idiomas disponibles
Idiomas disponibles
CAUTION
Verify and regularly check that the various bolted elements, fastening screws, quick releases and pass-through pins are
correctly tightened, and perform an overall check to ensure that all the parts are in order.
The nuts and all the other self-tightening parts can become loose so, these components need to be periodically checked and
tightened.
The recommended tightening torques for fastening the specific parts/components on the bike (e.g. handlebars, handlebar
attachment and stem, saddle, saddle clamp, wheels, etc.) can be identified depending on the relevant elements. An average
torque of 20Nm can be used for all other fastenings.
Verification of the correct tightening of the parts/components through lever systems (quick release, handlebar attachment,
seatpost collar, etc.), in the absence of technically precise indications of the relative values, can be done by testing that the
relative part/component being fixed is not mobile and/or unstable if subjected to a vigorous attempt to remove and/or extract
(handlebar, seatpost channel, wheels, etc.) and by verifying that the tightening lever has adequate resistance during the
closing phase (such as to leave a mark on the palm of the hand used for lever tightening, so-called "imprint on palm") and,
after closing, requires a considerable force to be exerted to allow relative opening.
Rear light
The rear LED light is already installed on the end of the rear luggage rack.
Switching on and off can be done manually using the appropriate button on the light itself.
CAUTION
Battery key set
The electrically power assisted cycle is exclusively equipped with 2 keys uniquely associated with the key lock located on the
battery installed on the product to allow locking and/or unlocking by extraction.
Identify the keys on the bike, located near the handlebar or attached to another component of the electrically power assisted
cycle (frame or battery), taking care that they do not get mislaid.
CAUTION
All OK check
If, during assembly, you encounter any manufacturing defects, unclear steps or difficulties with assembly, do not ride the
electrically power assisted cycle and contact the after-sales service of your authorised dealer or visit the website
www.argentobike.it
CAUTION
In the interest of technological development, the manufacturer reserves the right to modify the item with no prior notice and
this manual will not be automatically updated.
For further information and to consult different versions of the manual, visit www.argentobike.it.
13
Publicidad
