Display - ARGENTO Piuma Manual Del Usuario

The electrically power assisted cycle has a control device on the handlebar, LED or LCD display, powered by the battery
supplied with the bike which controls all the bike's electrical and electronic functions.
• Led display - CDE9-BT
Overview of controls and symbols
1. ON/OFF button
2. Light on/off button
3. Button to increase assisted pedalling (+)
4. Button to decrease assisted pedalling (-)
5. LED indicator to signal assisted pedalling selected (1-5)
6. LED indicator for residual battery charge (1-5)
7. Walk assist mode on/off lever
Function description
Display on/off
Press the ON/OFF button for at least 1 second to switch the display on or off.
Selecting the assisted pedalling level
Press the relevant button to increase or decrease the level of selected assisted pedalling.
The assisted pedalling level selected, which can vary from 1 to 5, is indicated on the display by the corresponding number of
LED indicator lights; see: 1-2-3-4-5.
The assisted pedalling level highlighted by 1 LED light on the display indicates the minimum setting for electrical support
provided by the motor.
The assisted pedalling level highlighted by 5 LED lights on the display indicates the maximum setting for electrical assistance
provided by the motor.
Electric assistance from the motor is excluded by decreasing the selected assisted pedalling level until the relevant LED lights
disappear completely.
Enabling walk assist mode
Decrease the selected assisted pedalling level until the relevant LED lights disappear completely and press the lever to
enable the walk assist mode which allows you to activate electric motor assistance up to a speed of 6Km/h.
Disable the function by releasing the lever.
CAUTION
The walk assist mode must be used in compliance with the regulations in force in the country of use and is only allowed when
pushing the electrically power assisted cycle and walking alongside it holding the handlebar grips firmly with both hands.

6. Display

16