Installing The Mounting Bracket; Engine Mounting; Blade Assembly - Create WIND PROP Manual De Usuario

Ocultar thumbs Ver también para WIND PROP:

Idiomas disponibles

IN STALLI N G T HE MOU NT I NG B R ACKE T

• The outlet box and beam must be securely mounted and capable of safely supporting at

least the weight of the fan.

• Do not fix the mounting bracket directly on ceilings less than 10mm to avoid the risk of the

screw loosening and coming out.

Wood roof

Attach mounting bracket with wood screws

and washers at ceiling joints.

E NG INE MOUN TI NG

• Receiver Place: Hook the motor on the left hook, then wire.

Advice: Another person should help you hold the ladder and hand you the fan once you've

climbed the ladder.

B L AD E AS SE MB LY

Align the holes in the motor with the holes in the blades. Secure and tighten all screws once

all blades are installed. Before permanently securing the screws, repeat with the remaining

blade arms.

Advice: To save time, you can put the washers on each screw before you install the blades.

Tighten the blade screws twice.

E NGL I SH

Receiver

Concrete ceiling

Drill the holes with an 8mm drill bit,

according to the length of the expansion

bolts. Next, fix the mounting bracket to the

ceiling with the expansion screws.

Tabla de Contenido