TFA 35.1165.01 Instrucciones De Uso página 16

TFA_No. 35.1165_Anleitung 21.03.2022
Wireless weather station
• Clean the devices with a soft damp cloth. Do not use solvents or scouring agents.
• The base station is suitable for indoor use only. Protect it from moisture!
• The outdoor transmitter is splashproof, but not watertight. When placed outdoors, choose a dry place for the transmitter.
4. Elements
Wireless weather station (base station)
A: Display (Fig. 1):
Upper window (Forecast):
A 1: Trend indicator
A 3: Bar graph indication of
atmospheric pressure for the last 24 hours
Middle right window (outdoor temperature and humidity):
A 5: MAX/MIN values
A 7: Outdoor temperature
A 9: Frost symbol
A 11: Symbol for temperature alarm
A 13: Reception symbol for the transmitter
A 15: Battery symbol for the transmitter
Lower window (time and date):
A 16: DCF reception symbol
A 18: Moon phase
A 20: Snooze symbol
A 22: Daylight Saving Time symbol
Middle left window (indoor temperature and humidity):
A 24: MAX/MIN values
30
12:28 Uhr Seite 16
A 2: Weather symbols
A 4: Relative atmospheric pressure
A 6: Trend indicator
A 8: Outdoor humidity
A 10: Upper/lower alarm level
A 12: Channel 1,2,3
A 14: Circle symbol for the alternating channel
A 17: Date/alarm time
A 19: Day of the week
A 21: Alarm symbol
A 23: Time
A 25: Trend indicator
Wireless weather station
A 26: Indoor humidity A 27: Indoor temperature
A 28: Battery symbol for the base station
B: Buttons (Fig. 2):
B 1: SNOOZE/LIGHT sensor button B 2:
B 3: –/CH button B 4:
B 5: + button B 6:
B 7: ALERT button B 8:
C: Housing (Fig. 2):
C 1: Battery compartment C 2:
C 3: Power adaptor connector
D: Outdoor transmitter (Fig. 3):
D 1: Temperature D 2:
D 3: Humidity D 4:
D 5: Reception symbol D 6:
D 7: Wall mounting hole D 8:
D 9: TX button D 10: 1/2/3 switch
D 11: Battery compartment
5. Getting started
• Remove the protective film from the display.
• Place the base station and the transmitter on a table at a distance of about 1.5 meters from each other. Avoid being close to
possible sources of interference such as electronic devices and radio equipment.
• Open the battery compartment at the back of the base station.
• Insert two new AA 1,5 V batteries into the battery compartment. Make sure the polarities are correct.
SET/MODE button
LIGHT button
ALARM button
MEM button
Stand
Battery symbol
Channel number
LED light
°C/°F button
31