Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION INSTRUCTIONS
We appreciate your commitment to KALLISTA quality products. Please take a moment to review this manual
before you install your KALLISTA product. If you encounter any installation or performance problems, please do
not hesitate to contact us at the phone number listed at the bottom of the page.
WARNING: Risk of scalding. High water temperature can cause severe burns. Set the water tempera-
ture at or below 120°F (49°C) following the adjustment procedure in the valve Installation Instructions.
‰ Prior to installation, unpack the new bodyspray and inspect it for damage. Return the bodyspray to its
protective carton until you are ready to install it.
‰ Observe all local plumbing and building codes.
‰ Shut off the water supply.
‰ Inspect the supply tubing. Replace if necessary.
‰ KALLISTA reserves the right to make revisions in the design of products without notice, as specified in the
Price Book.
5/64" & 5/32"
Hex Wrenches
Sealant Tape
1506293-2-A
2 of 23
THANK YOU FOR CHOOSING KALLISTA
BEFORE YOU BEGIN
TOOLS AND MATERIALS
Phillips
Screwdriver
Socket Wrench with 11 mm or
7/16" Socket and Extension
Masking Tape
Plus:
• Close Nipple or
• 1-1/2" NPT Pipe Nipple
• 1/2" NPT Female Fittings
• 1/2" Copper Pipe
• Level or Straight Edge
Questions? Problems? For additional assistance, please contact KALLISTA's Customer
Service Department at 1-888-4-KALLISTA (1-888-452-5547) or kallista.com.
Bodyspray
Publicidad
