universalblue UBE2404-21 Manual De Instrucciones página 67

• If the cable is damaged or needs replacing, this should be
done by an after-sales technician using the proper tools, so
as to avoid any accidents.
• If the appliance is being connected directly to the mains
supply, an omnipolar circuit breaker must be installed with a
minimum gap of 3mm between the contacts.
• The installer must ensure that the correct electrical
connection has been made and that it complies with safety
regulations.
• The cable must not be bent or compressed.
• The cable must be checked regularly and only replaced by a
properly qualified person.
• If the circuits reach a high temperature due to a deficient
ventilation , it is a clear sign that the hob has been incorrectly
installed. The first working sign would be a waste of power
and it is recommended to uninstall and install again the
hob. In case of incorrect installation, the supplier would not
be responsible for the problem found in the appliance. The
warranty could be cancelled at this point. "
67