Frequently Asked Questions - Motion CM-35 Manual

M O TI O N CM - 3 5 E LE CT RON IC C UR TA IN M O T O R

Frequently Asked Questions

Problem Cause
Power supply is not connected.
Remote battery is empty. (LEDS of
remote are flashing rapidly.)
Remote battery is inserted
incorrectly.
Blind does not work.
Radio-frequency interference
The distance from the remote to
the motor is too far.
The remote is not connected to
the blind.
Multiple blinds respond to Multiple blinds are paired to a single
a remote. (Unable to channel.
program a single blind)
No end limits are programmed.
Blind moves in small steps.
Favorite position can not No end limits are programmed.
be programmed.
Blind moves in the opposite The direction of rotation has been
direction. set incorrect.
The blind keeps moving left
The blind is in program mode.
and right.
24
Solution
Connect the power supply to the motor.
Replace the battery in the remote.
See the manual of the remote.
Replace the battery in the remote.
See the manual of the remote.
Make sure that the antenna of the motor
is out of the way from metal objects.
Move closer to the motor.
Pair the remote to the motor.
See step 6.
Pair the blind to a free channel to
program or use single select to program
the blind.
Program end limits. See step 5 - 6.
Program end limits. See step 5 - 6.
Change the direction of rotation.
See step 4.
Press the program button on the motor
to exit program mode.
M O T I O N C M -3 5 E L EC TR ONI C C U R TA I N MOT OR
25