Select Radio
• To show which
brand radio is "auto
detected" to the
interface, press the
"Autodetect" button.
The radio detected
will have a filled in
circle. If the incorrect
radio is shown, select
the proper radio.
• Following is a list of radio manufacturers that the interface presently acknowledges.
Others may be added at a later date. Universal "2 or 3 wire" radios can show up as any of
these radio manufacturers.
STEERING WHEEL CONTROL SETTINGS
(CONT.)
*If the SWC interface flashes Red (7) times, and an
Radios Detected by Interface
Alpine radio is not installed, that means there is an open
Eclipse (type 1) †
connection not accounted for. Verify that the 3.5mm jack
Kenwood ‡
is connected to the correct steering wheel jack/wire in
Clarion (type 1) †
the radio.
Sony / Dual
** The AXSWCH-PAR is required (sold separately). Also,
JVC
the software in the radio must be rev. 2.1.4 or higher.
Pioneer / Jensen
Alpine *
† If a Clarion or Eclipse radio is installed and the steering
Visteon
wheel controls do not function, change the radio to
Valor
Clarion (type 2) or Eclipse (type 2) respectively. If
the steering wheel controls still do function, refer
Clarion (type 2) †
to the Changing Radio Type document available at
Metra OE
axxessinterfaces.com.
Eclipse (type 2) †
LG
‡ If a Kenwood radio is installed and the L.E.D. feedback
Parrot **
flashes (5) times instead of (2), manually change the
XITE
radio type to Kenwood. To do this, refer to the Changing
Radio Type document available at
Philips
TBA
JBL
Insane
Magnadyne
Boss
Axxera
Axxerra (type 2)
axxessinterfaces.com.
17
REV. 6/30/22 INST99-5838CH