Cleaning The Engine Air Filter - Italjet DRAGSTER 125 Manual De Uso Y Mantenimiento

- If it is necessary to top up, remove
the tank cap (3) by unscrewing it
and introduce the coolant from the
hole (4) checking the level on the
tank (2).
- Once the level has been restored,
refit the cap (3) and the cover (1).
NOTE: The coolant is corrosive, if a little
is spilled during topping up, carefully clean
the parts that have been in contact with
water.
3
2
5.1.e

Cleaning the engine air filter

- Unscrew the screws (1) and remove
the cover (2).
1
- Remove the filter (3) from the filter
cover (2).
2
4
EN - 46
- Clean the filter (2) with suitable filter
cleaner and let it dry completely.
Do not use petrol or other
flammable solvents to clean
2 1
the filter.
- Check that the filter is not worn or
damaged, replace it if necessary.
- Apply specific oil for filters on the entire
surface of the filter (3) then squeeze it
to remove excess oil.
- Refit the filter (3) on the cover and then
replace the cover on the filter box.
- Check the condition of the gasket (4),
replace if damaged.
3
WARNING
3