And 881Ct With 1813 Bending Table - Greenlee 881 Manual De Instrucciones

Assembly and Operation Instructions
881 and 881CT with 1813 Bending Table (refer to "Identification—Major Components")
1. Lay out the connecting bars (C), roller unit (D), and
two hitch pin clips (E).
Connecting Bar
with Bending
Instructions
Decals
2. Attach the roller unit to one of the connecting bars
with a hitch pin clip, as shown.
Decals face
outward
3. Repeat Step 2 for the other connecting bar.
Greenlee Tools, Inc.
881 and 881CT Hydraulic Benders
4. Insert 29" leg (25) into leg support unit (23). Tighten
the cap screw (24). Repeat for the other three legs.
5. Insert two 10-foot lengths of IMC or rigid conduit
into the leg support unit (23). Tighten four cap screws
(24).
Note: These lengths of conduit are not furnished
with the 1813 Bending Table.
6. Position the bender mounting unit (27) as shown,
and slide it, tabs first, onto the two 10-foot conduits.
10
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
Tabs