Greenlee 881 Manual De Instrucciones página 11

Assembly and Operation Instructions
881 and 881CT with 1813 Bending Table (cont'd)
7. Position the bender mounting unit 15" from the
leg support unit. Tighten the two bender mounting
unit screws (28).
8. Slide the pipe vise unit (38) onto the two 10-foot
conduits, as shown.
Greenlee Tools, Inc.
881 and 881CT Hydraulic Benders
9. Attach the second leg support unit (23) to the
10-foot conduits. Tighten the four screws (24).
5"
10. Hang the two pipe clamps (34) over each of the
10-foot conduits. Set the pipe clamps 5" and 12"
from the bender mounting unit. Mount the pump
supports (26) onto the clamps. Do not tighten
the clamps.
11
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
Pipe Clamp
12"
Pump Support Unit