Greenlee 881 Manual De Instrucciones página 15

Assembly and Operation Instructions
881 and 881CT with 1813 Bending Table (cont'd)
26. Remove the cylinder block pin from the 3" conduit
hole in the connecting bar. Rotate the pump control
lever clockwise to retract the ram. Position the
cylinder block at the proper location for the size of
conduit to be bent. Insert the two cylinder block
pins (F) through the connecting bars and through
the cylinder block. Secure the pins with two hitch
pin clips (E).
27. Remove the yoke pin from the ram positioner.
Greenlee Tools, Inc.
881 and 881CT Hydraulic Benders
28. Remove the ram positioner from the connecting
bar unit.
Saddle Pin
29. Load the shoe into the bender with the saddle pin
hole to the left, as shown.
15
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070