Prepare The Connections - Ingeteam NEO Manual De Instalación

Ingeteam

3.1.6. Prepare the connections

Following the template's indications, carry out the following steps:
1. Place the tube for the power supply wiring at the indicated height.
2. Cut and strip the cables to the recommended length.
3. Fit the ferrules.
CAUTION
Always use a suitable tool (crimper) to avoid bad connections that can cause overheating in the connection
terminals.
NEO / NEO Pro (single phase)
25 cm
Connection tube
5.5 cm
10
Connection tube
20 mm hollow
crimp ferrule
NEO Pro (three-phase)
25 cm
5.5 cm
ABV2013IQM01_ - Installation manual
Installation
20 mm hollow
crimp ferrule