Shadow Gap Cuts - Mafell KSS300 Instrucciones De Funcionamiento Y Seguridad

5.7 Shadow gap cuts

Take note of the minimum shadow gap width when sawing:
Cutting depth
0 - 32 mm [0 - 1.26 in]
32 - 42 mm [1.26 - 1.65 in]
Use the following procedure to cut a shadow gap:
1. Set the desired cutting depth on the machine.
Refer to the table above for the minimum
➢
shadow gap width.
2. Using the pre-feed lever (3), pull open the
movable protective hood and place the machine
on the workpiece to be fitted.
3. Switch on the machine.
4. Push the machine steadily forward in working
direction.
➢ Use a HEPA class suction unit.
5. Switch off the machine after you have finished
machining the workpiece.
Shadow gap cut.
✓
22
Shadow gap cut width
without parallel guide
fence
13 mm [0.51 in]
13 mm [0.51 in]
Fig. 16: Cutting a shadow gap
KSS300
Shadow gap cut width
with parallel guide fence
14 mm [0.55 in]
18 mm [0.71 in]
01/2022