Schedule - Sime SHP M PRO Manual De Funcionamiento

PUMP_D RUNNING TIME is set 30 minutes (PUMP_D RUNNING TIME
can be set in "DHW MODE SETTING" in "FOR SERVICEMAN").
The pump will run according to the figure below:
PUMP
ON
OFF
6:00 6:30 7:00 7:30 8:00 8:30 9:00 9:30

6.3 SCHEDULE

SCHEDULE contains the following menu:
1) TIMER
2) WEEKLY SCHEDULE
3) SCHEDULE CHECK
4) CANCEL TIMER
6.3.1 TIMER
The TIMER function is used to set different operation mode and
temperature in different time periods. If the TIMER is activated,
displayed on home page.
If "WEEKLY SCHEDULE" and "TIMER" are both set, and "WEEKLY
SCHEDULE" is set later than "TIMER", then the "WEEKLY SCHEDULE"
setting is valid, the "TIMER" is invalid.
38
is