Publicidad
Display (diS) Menu
From the CP Display, press the UP or DOWN key to access the diS Display Menu. From the diS Display, press the SELECT key: the first trE parameter will appear. To change the
parameter value, press the SELECT key and then UP or DOWN. Confirm by pressing the SELECT key again. Press UP and DOWN to scroll through the menu.
NAME
trE
Temperature display with decimal points
Y: display with decimal points, n: display without decimal points.
CA1
Calibration of the temperature sensor
Used to calibrate the temperature sensor with an ice bath
tu
Temperature units
0: temperature display in degrees Centigrade, 1: temperature display in degrees Fahrenheit.
In-Cab Control Box
If no key is pressed within 10 seconds, the cab control box will return to the Standard Display.
CAUTION!
DESCRIPTION
Eng
Eng
Spa
Eng
Fre
Fre
DEFAULT
MIN
MAX
n
n
Y
0
-12
12
0
0
1
33
Publicidad
