Unit Specifications and Features
Indoor unit display
NOTE:
This display panel on the indoor unit can be used to operate the unit in case the remote control
has been misplaced or is out of batteries.
Air flow louver (at air outlet)
Air inlet (with air filter in it)
Air flow louver (at air outlet)
Display panel
(A)
•
Displays temperature and Error codes:
"
" when defrosting(for model B cooling &
heating units)
"
" for 3 seconds when:
•
TIMER ON is set(for model B)
•
SWING or SILENCE is turned on
"
" for 3 seconds when:
•
TIMER OFF is set(for model B)
•
SWING or SILENCE is turned o
"
" when unit is self-cleaning
"
" when 8 C heating feature is turned on
Infrared receiver
Operation indicator
Timer indicator
PRE-DEF
(pre-heating/defrost)
indicator
Manual button
(B)
MANUAL button: This button selects the mode
in the following order: AUTO, FORCED COOL, OFF.
FORCED COOL mode: In FORCED COOL mode,
the Operation light flashes. The system will then
turn to AUTO after it has cooled with a high wind
speed for 30 minutes. The remote control will be
disabled during this operation.
OFF mode: The unit turns o and the remote
control is re-enabled.
51
Display panel
Refrigerant
connecting
pipe
Drain hose
Infrared receiver
Operation indicator
Manual button