Publicidad
Idiomas disponibles
Idiomas disponibles
SCHEDULED MAINTENANCE TABLE (Continues)
ENGLISH
22
(*)
For the relevant procedure, refer to the Service Manual.
(1) Daily or after using the machine.
(2) Or before start-up.
(3) Or more often in dusty areas.
(4) Or more frequently if the machine is used on slopes.
(5) Or every 6 months.
(6) And after the first 20 running-in hours.
(7) Maintenance procedures to be performed by an authorized Honda/Yanmar dealer.
(8) Change the hydraulic system oil after 500 hours or every year.
Procedure
Hopper lifting system hydraulic oil level check
Skirt height and operation check
Brake cable check/adjustment
Filter shaker operation check
Main broom drive belt visual inspection
Engine oil change
Spark plug check/cleaning
Steering chain cleaning
Steering chain check/adjustment
Safety device operation check
Brake drums check/adjustment/replacement
Main broom drive belt check and/or replacement
Hopper gasket integrity check
Lifted hopper sensor operation check/adjustment
Motor carbon brush check and/or replacement
Spark plug replacement
Engine idle speed check/adjustment
Valve clearance check/adjustment
Hydraulic system oil change
Supply hose replacement
Engine combustion chamber cleaning
Dust guard system water filter check and cleaning (optional)
Engine air filter cleaning
Hopper dust filter check and cleaning ("B" method)
Engine baffle plate cleaning
Hopper dust filter check and cleaning ("C" method)
Paper engine air filter replacement
INSTRUCTIONS FOR USE
SW5500 - 1467287000
Upon
Every 10
Every 50
delivery
hours
hours
(2)
(*) (4)
(3)
Every 500 hours (7)
09/2016
Every
Every
Every
100
200
year
hours
hours
(3)
(3)
(*)
(*)
(5) (6)
(*)
(*)
(2)
(7)
(*) (4)
(3)
(*)
(*)
(*)
(*)
(*)
(7)
(*) (8)
(*)
Publicidad
