Descargar Imprimir esta página

Nilfisk Advance SW5500 Instrucciones De Uso página 8

Ocultar thumbs Ver también para Advance SW5500:

Publicidad

Idiomas disponibles

Idiomas disponibles

ENGLISH
6
WARNING!
Do not tilt the machine more than the angle indicated on the machine itself, in order to prevent instability.
other brooms could reduce safety.
This is a class A product. In a domestic environment this product may cause radio interference in which
case the user may be required to take adequate measures.
Do not wash the machine with direct or pressurized water jets, or with corrosive substances.
Use the machine only where a proper lighting is provided.
not authorize anyone to use the sweeper in dark environments.
While using this machine, take care not to cause damage to people or objects.
If the proper protective guard (FOPS)(optional) is not installed, do not use the machines in areas where
there is the risk of falling objects.
Do not lean liquid containers on the machine, use the relevant can holder.
The machine storage temperature must be +32 °F to 104 °F (0 °C to +40 °C).
The machine working temperature must be +32 °F to 104 °F (0 °C to +40 °C).
The humidity must be between 30 % and 95 %.
Always protect the machine against the sun, rain and bad weather, both under operation and inactivity
condition. Store the machine indoors, in a dry place. (If applicable) This machine must be used in dry
conditions, it must not be used or kept outdoors in wet conditions.
The machine maximum capacity, operator's weight not included, is 529 lb (240 kg) (the weight of waste).
Avoid sudden stops when the machine is going downhill. Avoid sharp turns. Drive at slow speed when
going downhill.
This machine cannot be used on roads or public streets.
Do not tamper with the machine safety guards.
Follow the routine maintenance procedures scrupulously.
Do not allow any object to enter into the openings. Do not use the machine if the openings are clogged.
Always keep the openings free from dust, hairs and any other foreign material which could reduce the air
(Only for versions equipped with DustGuard™ system). Pay attention during machine transportation
when temperature is below freezing point. The water in the tank or in the hoses could freeze and seriously
damage the machine.
When the machine is to be pushed for service reasons (lack of fuel, etc.), the speed must not exceed 4
In case of machine malfunctions, ensure that these are not due to lack of maintenance. If necessary,
request assistance from the authorized personnel or from an authorized Service Center.
If parts must be replaced, require ORIGINAL spare parts from an Authorized Dealer or Retailer.
To ensure machine proper and safe operation, the scheduled maintenance shown in the relevant chapter of
this Manual, must be performed by the authorized personnel or by an authorized Service Center.
The machine must be disposed of properly, because of the presence of toxic-harmful materials (batteries,
oils, etc.), which are subject to standards that require disposal in special centers (see the Scrapping
chapter).
While the engine is running, the silencer warms up; do not touch the silencer when it is hot to avoid burns
Technical service procedures on the engine must be performed by an authorized Dealer.
Only use original spare parts or parts of matching quality for the engine. Using spare parts of lower quality
can seriously damage the engine.
See also the SAFETY RULES in the Engine Manual, which is to be considered an integral part of this
Manual.
Use only brooms supplied with the machine or those specified in the Instructions for Use Manual. Using
Before using the machine, close all doors and/or covers as shown in the Instructions for Use Manual.
Working lights (optional) have to be used only to enhance visibility on the floor to be cleaned, but they do
Do not bump into shelves or scaffoldings, especially where there is a risk of falling objects.
Do not use the machine as a means of transport, or for pushing/towing.
In case of fire, use a powder fire extinguisher, not a water one.
Adjust the operation speed to suit the floor conditions.
flow.
Do not remove or modify the plates affixed to the machine.
km/h.
or fires.
Running the engine with an insufficient quantity of oil can seriously damage the engine. Check the oil level
with the engine off and the machine on a level surface.
Never run the engine if the air filter is not installed, because the engine could be damaged.
INSTRUCTIONS FOR USE
SW5500 - 1467287000
09/2016

Publicidad

loading