Publicidad
Idiomas disponibles
Idiomas disponibles
Partial focus cleaning mode
Short press
and
simultaneously to have the robot enter the partial focus
cleaning mode. In this mode, the robot performs a 90-degree bow-shaped cleaning
twice on a square area of 1.5 meters × 1.5 meters. During partial focus cleaning, short
press any key for the robot to pause the cleaning. When the partial focus cleaning is
paused, short press
to continue the partial focus cleaning.
Adding water to or cleaning the water tank midway through a job
During use, the need may arise to add water to or clean the water tank. To do so,
short press
for the robot to enter the pause state, open the flip cover, and take out
the water tank. After adding water to or cleaning the water tank, put it back in place,
close the flip cover, and then short press
Tips:
Before starting the cleaning task, clean the wastewater tank and ensure that there is water in the clean
water tank.
Please remove the water tank before adding water.
Warning: In order to prevent damage to the robot, turning the robot over before the water tank has been
removed is strictly prohibited!
to continue cleaning.
14
Switching the cleaning mode
The robot can be equipped with either
a water tank cover for floor scrubbing or
a water tank cover for dry sweeping. By
replacing the water tank cover, the robot
can automatically recognize the new
tank cover and switch to floor scrubbing
or dry sweeping mode. The water tank
cover for floor scrubbing is installed by
default.
Water tank cover for
floor scrubbing
Water tank cover for
dry sweeping
Tips:
The Mi Home app cannot switch the cleaning
mode.
For garbage that sticks to the floor when exposed
to water, first run a simple dry sweep and then use
the floor scrubbing mode for enhanced cleaning.
Use the dry sweeping mode to clean carpets and
floor mats.
Publicidad
