Maintenance And Care - smartmi VortexWave Manual De Usuario

Maintenance and care

Replacing the water tank cover/Cleaning the wastewater tank
Take out the water tank, hold the
1
lifting handle of the wastewater tank
cover, and move the cover upward.
2 Use a new dedicated water tank
cover or clean the wastewater tank
using the cleaning brush delivered
with the robot.
3 After cleaning, wipe off the water at
the bottom of the water tank before
replacing it.
Note: It is recommended that the wastewater tank
be cleaned immediately upon completion of each
floor scrubbing.
Cleaning/Replacing the roller brush
Unfasten the roller brush cover buckle
1
to open the cover and pull out the
roller brush.
Tips: It is recommended that the roller brush be
cleaned once a month. It is also recommended
that the roller brush be replaced every 6-12 months.
Use a hair cleaning knife to cut off
2
the hair wound on the roller brush
and clean the roller brush.
Note: Keep the hair cleaning knife out of reach of
children.
15
Wash the roller brush with clean
3
water and dry it or put it back on
the robot and start self-cleaning
for the roller brush. Once self-
cleaning is completed, the robot will
automatically air dry the roller brush.