5-3. CLEANING THE GROuND COFFEE
CONTAINER
• Place
a
container
dispenser fork (7)
• Make sure that the container (5) is
empty, and pull the dispenser lever (8) to
eliminate any residual coffee.
PRObLEM
The machine doesn't turn
on
The machine works but
the ground coffee doesn't
come out
Mechanical blockage
The dispenser doesn't turn Broken gear spring
The dispenser's lever
doesn't return to its initial
position
The set grinding level is
incorrect or too difficult
underneath
the
6. TROubLESHOOTING
CAuSE
1. The power plug is not
fully inserted
2. The machine is not re-
ceiving power
1. No coffee beans in the
relative container
2. Grinding elements too
close together
Foreign object caught
between the grinding
elements
Broken return spring
Worn grinding elements
8
• After emptying the container (5), remove
it from the machine by pressing the
release button (9)
• Clean the inside with warm water and a
neutral detergent to eliminate any coffee
residues and greasy substances. Dry the
container thoroughly, and reinsert it into
the body of the machine by performing
the same operations in the reverse order.
1. Fully insert the plug into
the electrical outlet
2. Check the power cable
1. Load the coffee beans
2. Gradually increase the
grind setting and check
the coffee grinder's func-
tionality
Eliminate any foreign
objects caught between
the grinding elements by
loosening the hopper by
a few turns and restarting
the machine, then return
the hopper to its original
position
Contact the SERVICE
CENTRE
Contact the SERVICE
CENTRE
Contact the SERVICE
CENTRE
SOLuTION