Publicidad
5
Operation
Note: When one of the above malfunctions occurs, turn off the unit, and check for
C
any obstructions. Restart the unit, if the malfunction is still present, turn off the unit
and unplug the power cord. Contact the manufacturer or its service agents or a similar
qualified person for service.
Exhaust hose installation
The exhaust hose and adaptor must be installed or removed in accordance with the usage mode. For
Cool, Heat (heat pump type) or Auto mode must be installed exhaust hose.
For fan, dehumidllfy or heat (electrical heat type) mode must be removed exhaust hose.
5.1 Operation instructions
Cool operation
- Press the "MODE" button until the "Cool" indicator light comes on.
- Press the Adjust buttons "+" or "-" to select your desired room temperature. The temperature can be
set within a range of 17°C-30°C.
- Press the "FAN SPEED" button to choose the fan speed.
Heat operation (cooling only models without this function)
- Press the "MODE" button until the "Heat" indicator light comes on.
- Press the Adjust buttons "+" or " - " to select your desired room temperature. The temperature can
be set within a range of 17°C-30°C.
- Press the "FAN SPEED" button to choose the fan speed. For some models, the fan speed can not be
adjusted under Heat mode.
Dry operation
- Press the "MODE" button until the "Dry" indicator light comes on.
- Under this mode, you cannot select a fan speed or adjust the temperature. The fan motor operates
at Low speed.
- Keep windows and doors closed for the best dehumidifying effect.
- Do not put the duct to window.
Auto operation
- When you set the air conditioner in Auto mode, it will automatically select cooling, heating (cooling
only models without), or fan only operation depending on what temperature you have selected and
the room temperature.
- The air conditioner will control room temperature automatically round the temperature point set by
you.
- Under Auto mode, you can not select the fan speed.
75
Publicidad
