HotSpring HOT SPOT Serie Manual Del Propietário página 20

2. Press the (+)button to display POWR + and turn the audio system
ON. Press the (-)button to
display PWR - and turn the audio system OFF.
IMPORTANT: The power can take a few seconds to turn on or off.
TO PAIR BLUETOOTH
On your device, find My Spa BTXR. If you DO NOT see this, another
device may already be connected (see To Disconnect Bluetooth on
following page).
1. Press the MODE ( or ) button until the SETUP screen is
displayed.
2. Press the (+)button to display one of three audio sources, BLUE,TV,
AUX in the setup menu. Bluetooth should be selected.
3. Press the MODE ( or ) button until the PAIR+ screen is displayed.
4. Press the (+)button followed by pressing "connect" next to My Spa
BTXR on your device to pair.
After pairing, you will be ready to use your Bluetooth device. Only one
paired Bluetooth device will work at a time.
TO ADJUST VOLUME
From the AUDIO screen:
1. Press the (+)button to display POWR.
2. Press the MODE ( ) button to display
POWER
VOL.
3. Press the (+)button to increase volume and the (-)button to
decrease volume.
NOTE: Volume range is from 0-40. No number displayed indicates
POWER
Volume is OFF.
TO PAUSE/PLAY
From the AUDIO screen:
POWER
1. Press the the (+)button to display POWR.
2. Press the MODE ( ) button to display VOL.
3. Press the MODE ( ) button to display
POWER
PLAY.
4. Press the (+)button to start the song or the POWER
(-)button to pause the song.
TO CHANGE TRACK POWER
POWER
From the AUDIO screen:
Press the the (+)button to display POWR.
1.
2. Press the MODE ( ) button to display
POWER
VOL.
POWER
3. Press the MODE ( ) button to display
PLAY.
POWER
4. Press the MODE ( ) button to display TRCK +.
POWER
5. Press either (+)button or (-)button to change the track (song).
TO GO TO SETUP MENU
From the AUDIO screen:
POWER
1. Press the (+)button to display POWR.
2. Press the MODE ( ) button to display
VOL.
POWER
English Spanish
POWER
POWER
POWER POWER
POWER POWER
POWER POWER
POWER POWER
POWER
POWER
POWER POWER
POWER POWER
POWER
POWER POWER
POWER POWER
POWER
POWER POWER
POWER
POWER
POWER
POWER
POWER
POWER
POWER POWER
POWER
POWER
POWER POWER
POWER
POWER
Page 17
French
POWER
3. Press the MODE ( ) button to display PLAY.
4. Press the MODE ( ) button to display TRCK +
5. Press the MODE ( ) button to display SETUP.
TO CHANGE AUDIO SOURCE
From the SETUP screen:
Press the (+)button to display one of three
1.
audio sources, BLUE,TV, AUX.
2. Press the (+)button to raise to the next
source or press the (-)button to lower to the POWER
next source. Go to the source you will be using.
POWER
®
NOTE: Blue = Bluetooth . To use the Bluetooth screen, your audio
Bluetooth device must be paired with the spa.
POWER
TO ADJUST TREBLE
POWER
From the SETUP screen:
the (+)button
1. Press to display one of four
POWER
POWER
audio sources, IPOD,TV, AUX, BLUE.
2. Press the MODE ( ) button to display POWER
TRE -5 to +5.
3. Press (+)button to raise the Treble or press (-)button to lower the
POWER
POWER
treble.
POWER
TO ADJUST BASS
From the SETUP screen:
POWER
POWER
the (+)button
1. Press to display one of four audio sources, IPOD,TV, AUX,
POWER
BLUE.
2. Press the MODE ( ) button to display TRE.
POWER
POWER
3. Press the MODE ( ) button to display
POWER
BAS -5 to +5.
4. Press (+)button to raise the Bass or press
(-)button to lower the Bass.
POWER POWER
POWER
TO ADJUST BALANCE
From the SETUP screen:
POWER
the (+)button
1. Press to display one of four audio sources, IPOD,TV, AUX,
BLUE.
2. Press the MODE ( ) button to display TRE.
3. Press the MODE ( ) button to display
POWER
BAS.
4. Press the MODE ( ) button to display
BAL -5 to +5.
5. Press (+)button to raise the Balance # or press (-)button to lower the
Balance #.
POWER
POWER
POWER
POWER
POWER
POWER
POWER
POWER
POWER
POWER
POWER
POWER
POWER
POWER
POWER
POWER POWER
POWER
POWER
POWER
Operating Instructions